CSM_RH Paper 13
Positivity-Lift Precision Tax, Asymptotic-Sieve Geometry Mismatch, and the Endogenous Möbius Bilinear Frontier
Project: CSM_RH
Paper: 13
Version: v0.1
Date: 2026-09-05
Parent state: CSM_RH v1.3 / Paper 12
Campaign: 12 — PARITY_BREAKING_ENDOGENOUS_BILINEAR_AUDIT
Status: asymptotic-sieve adaptation audit / bilinear-frontier extraction; not a proof or disproof of RH
0. Trust boundary
This paper does not prove or disprove the Riemann Hypothesis.
Canonical root state:
RH_PROVED = FALSE
RH_DISPROVED = FALSE
GLOBAL_RH_CERTIFICATE = FALSE
CSM_RH_ROOT_STATUS = OPEN
The paper tests whether the Friedlander–Iwaniec asymptotic-sieve philosophy can be adapted to the prime-error self-correlation target.
The conclusion is:
PARITY-BREAKING BILINEAR INFORMATION
is the right mechanism type
STANDARD NONNEGATIVE ASYMPTOTIC SIEVE
is not a fixed-power PESC theorem
POSITIVITY LIFT
incurs N^(3-o(1)) precision scale
STANDARD LOG-RELATIVE SIEVE OUTPUT
is exponent-insufficient
DIRECT PESC BILINEARITY
is additive/triangular
FRIEDLANDER-IWANIEC BILINEARITY
is multiplicative a_mn geometry
BRIDGE
requires a new endogenous Möbius bilinear theorem
No live GLM-5.3-Flash run is claimed.
1. Canonical target
Recall
and
The fixed-power target is
for one fixed
2. Native bilinear form of PESC
Since
we have:
Theorem 2.1 — Additive Triangular Bilinear Form
This is the native bilinear geometry of PESC.
It is:
additive/order geometry:
m < n
not
multiplicative/product geometry:
k = mn
The distinction matters for parity-breaking sieve technology.
3. Friedlander–Iwaniec parity-breaking input
Friedlander and Iwaniec's asymptotic sieve begins with a nonnegative sequence
In addition to the usual divisor-distribution remainder hypothesis, they assume a bilinear estimate of the schematic pinned form
over a prescribed range of near the square-root scale, where
The source of parity sensitivity is the factor
This is genuinely stronger information than ordinary linear sieve axioms.
It is also a multiplicative-index bilinear form.
4. Why the direct prime detector is not a useful F–I sequence
If one tries to set
then for
because is composite.
Therefore the interior multiplicative bilinear form is degenerate on the prime-supported detector itself.
A nontrivial F–I embedding must use a sequence which has support on composite indices as well.
This is the first geometry mismatch.
5. Positivity lift of the endogenous target
The natural target sequence
is signed.
Choose
Define two nonnegative sequences
Then
Define the dimension-one prime-detection error functional
6. Exact positivity-lift bridge
Theorem 6.1
Proof
Since
we have
Thus a sufficiently accurate prime-detection theorem for both lifted sequences would prove PESC.
7. Size of the positivity baseline
The endpoint weight satisfies
Therefore
Hence at least one lifted sequence has total mass
Chebyshev gives
The classical PNT zero-free-region error gives a better but still subpower scale
Thus the natural lifted mass scale is
8. Positivity-Lift Precision Tax
Suppose one applies a prime-detection theorem to the two lifted sequences separately.
If its error is only relative-logarithmic,
where
then the resulting PESC bound is at best
This is not
for any fixed
Create:
O-RH-027
POSITIVITY_LIFT_FIXED_POWER_PRECISION_TAX
status:
CERTIFIED
Statement:
Converting the signed endogenous PESC weight into separate nonnegative sieve sequences creates total mass of exponent . Independent logarithmic-relative prime-detection errors cannot yield a fixed PESC power.
9. Standard asymptotic-sieve output scale
In Friedlander–Iwaniec's theorem, after the sieve axioms are imposed, the prime sum has the expected main term with logarithmic relative precision, together with the controlled remainder generated by the sieve hypotheses.
Their parity-breaking bilinear hypothesis is extremely strong in logarithmic terms, but the architecture is designed to obtain an asymptotic prime-counting formula, not an relative error for the present lifted mass scale.
Therefore even an optimistic successful verification of the standard F–I axioms for would not by itself prove PESC .
Create:
O-RH-028
STANDARD_ASYMPTOTIC_SIEVE_ERROR_SCALE_FLOOR
status:
CERTIFIED_AS_PRECISION_MISMATCH
This is a precision statement.
It is not a criticism of the asymptotic sieve theorem.
10. Coupled-error issue
The exact PESC bridge uses the difference
Two independent estimates
give only
A cancellation between the two sieve errors cannot be assumed.
Therefore a route which hopes that the huge positivity baselines cancel after two independent asymptotic-sieve applications requires a new coupled signed error theorem.
That theorem is not part of the standard nonnegative asymptotic sieve.
11. Endogenous divisor-distribution remainder
To model a dimension-one sieve with local density
the endogenous part of the linear remainder contains
A power-accurate lifted sieve would need sufficiently strong averaged control of these quantities over the required divisor range.
Thus even the Type-I side is no longer an external smooth-weight distribution problem.
It is distribution of the prime-generated error itself along multiples.
12. Endogenous multiplicative parity-breaking form
Insert the lifted sequence into the Friedlander–Iwaniec bilinear geometry.
The endogenous component is
This is the exact new parity-sensitive arithmetic form exposed by the adaptation.
A fixed-power implementation would require, in the relevant bilinear range, an estimate of the form
or another quantitatively sufficient variant after normalization.
No such theorem is established here.
13. Additive–Multiplicative Bilinear Geometry Mismatch
PESC itself is
The asymptotic-sieve parity-breaking input is of the form
The first couples two prime increments through order.
The second couples multiplicative factors through their product.
There is no identity-level equivalence between these two bilinear geometries.
The positivity lift supplies a bridge only by changing the sequence under study.
That bridge creates the new endogenous divisor and Möbius bilinear obligations.
Create:
O-RH-029
ADDITIVE_MULTIPLICATIVE_BILINEAR_GEOMETRY_MISMATCH
status:
CERTIFIED
This obstruction does not say multiplicative bilinear methods cannot prove PESC.
It identifies the transfer debt.
14. What parity-breaking contributes
The audit does not reduce Friedlander–Iwaniec parity breaking to "just another sieve".
Their key additional axiom explicitly probes multiplicative parity through
and this type of bilinear information can distinguish sequences which ordinary sieve data cannot distinguish.
Tao's sieve notes make the same structural point:
linear / Type-I sieve data
retains the parity barrier
bilinear / Type-II information
can distinguish multiplicative parity
but the required bilinear asymptotics
must come from deep external arithmetic input
Thus the mechanism lesson survives intact.
For PESC, the required external input is now explicitly endogenous.
15. Why standard asymptotic sieve does not directly apply to PESC
There are three independent reasons.
15.1 Sign
The natural sequence
is signed.
The standard asymptotic sieve begins with nonnegative weights.
15.2 Precision
The positivity lift has exponent- mass.
Logarithmic relative error is insufficient for a fixed PESC power.
15.3 Geometry
The native PESC bilinear form is additive triangular.
The parity-breaking sieve hypothesis is multiplicative.
Therefore:
16. Power-Accurate Coupled Signed Asymptotic Sieve
One possible future theorem would be a coupled signed extension of asymptotic sieve designed directly for the pair
It would have to control
without paying the full independent positivity baselines.
Such a theorem would require:
signed coupling across the two lifts
power-accurate Type-I distribution
parity-breaking multiplicative bilinear input
target-fidelity against B(n-1)
fixed-power final error
No existing theorem is being claimed to have these properties.
Create:
S-RH-023
POWER_ACCURATE_COUPLED_SIGNED_ASYMPTOTIC_SIEVE
status:
OPEN
17. Endogenous Möbius Bilinear Frontier
Create the mechanism frontier:
F-RH-012
ENDOGENOUS_MOBIUS_BILINEAR_FIDELITY
abbrev:
EMBF
status:
OPEN
Canonical prototype:
The purpose of the next campaign is not to assume this bound.
It is to determine whether EMBF has any lower-strength route or whether fixed-power EMBF already loops back to the PESC / zero-strip core.
18. Campaign 12 candidate audit
C12-A — direct F–I on the prime detector
status:
REJECTED / DEGENERATE
reason:
q_mn = 0 for m,n>1
C12-B — nonnegative positivity lift
status:
EXACT TARGET BRIDGE
PRECISION INSUFFICIENT WITH STANDARD LOG-RELATIVE OUTPUT
C12-C — separate asymptotic sieve on a+ and a-
status:
INSUFFICIENT WITHOUT COUPLED ERROR CANCELLATION
C12-D — signed direct asymptotic sieve
status:
NOT A STANDARD EXISTING THEOREM
SURVIVES AS NEW THEOREM FAMILY
C12-E — endogenous F–I bilinear form
status:
SURVIVOR
PROMOTED TO EMBF
19. EPBPF status
Paper 12 introduced
F-RH-011
ENDOGENOUS_PARITY_BREAKING_PRIME_FEEDBACK
EPBPF
After the present audit:
STANDARD ASYMPTOTIC-SIEVE INSTANCE
CLOSED / NO DIRECT FIXED-POWER ROUTE
GENERAL PARITY-BREAKING IDEA
REMAINS OPEN
CANONICAL NEW SUBFRONTIER
EMBF
Thus EPBPF is partially compiled rather than fully retired.
20. Campaign 13
The next campaign is:
CSM_RH Campaign 13
ENDOGENOUS_MOBIUS_BILINEAR_STRENGTH_AUDIT
Target:
F-RH-012
EMBF
The campaign must determine whether a fixed-power EMBF estimate is:
a genuinely different route,
a hidden Mertens / zero-strip theorem,
a restatement of PESC after recombination,
or a viable new multilinear frontier.
21. Campaign 13 required questions
Q1
What is the exact scale of EMBF in the Friedlander–Iwaniec bilinear window?
Q2
Can the mu(mn) factor be separated into mu(m)mu(n) plus a coprimality condition without losing the target?
Q3
Does fixed-power EMBF imply a fixed-power Mertens estimate on any slice?
Q4
Can averaging over m produce a real gain, or does the coprimality structure leave a one-variable Möbius sum?
Q5
How does gamma(n,C) change the parity information?
Q6
Can known Type-II / large-sieve technology give any fixed N-power?
Q7
If not, what exact new Möbius-prime-error correlation theorem is required?
22. Campaign 13 rejection filters
Reject a candidate if:
R1. It assumes square-root Möbius cancellation.
R2. It hides a fixed zero-free half-plane in a Mertens input.
R3. It treats the outer absolute value as harmless.
R4. It replaces the endogenous by an external bounded test function.
R5. It obtains only logarithmic or stretched-logarithmic saving.
R6. It calls the Friedlander–Iwaniec bilinear axiom itself a proved input.
23. External calibration
Friedlander and Iwaniec, Asymptotic sieve for primes, Annals of Mathematics 148 (1998), introduce an additional bilinear hypothesis specifically to break the sieve parity problem.
Their pinned hypothesis contains the factor
inside a multiplicative bilinear form and is required over a range near the square-root scale.
They explain that the cancellation source is the sign change of the Möbius factor.
Tao's sieve notes likewise emphasize that Type-II bilinear information can break parity, but the required bilinear asymptotics normally demand deep input outside sieve theory.
These facts motivate EMBF.
They do not prove it.
24. State transition
The canonical transition is:
CSM_RH v1.3
->
CSM_RH v1.4
with:
Campaign 12
CLOSED_AS_ASYMPTOTIC_SIEVE_ADAPTATION_AUDIT
O-RH-027
POSITIVITY_LIFT_FIXED_POWER_PRECISION_TAX
CREATED / CERTIFIED
O-RH-028
STANDARD_ASYMPTOTIC_SIEVE_ERROR_SCALE_FLOOR
CREATED / CERTIFIED AS PRECISION MISMATCH
O-RH-029
ADDITIVE_MULTIPLICATIVE_BILINEAR_GEOMETRY_MISMATCH
CREATED / CERTIFIED
F-RH-011
EPBPF
PARTIALLY COMPILED
F-RH-012
EMBF
CREATED / OPEN
S-RH-023
POWER_ACCURATE_COUPLED_SIGNED_ASYMPTOTIC_SIEVE
CREATED / OPEN
Campaign 13
ENDOGENOUS_MOBIUS_BILINEAR_STRENGTH_AUDIT
READY
25. Final status
RH = OPEN
PESC = OPEN
STANDARD ASYMPTOTIC SIEVE ADAPTATION = NO DIRECT FIXED-POWER ROUTE
PARITY-BREAKING BILINEAR IDEA = STILL RELEVANT
POSITIVITY LIFT = EXACT BUT PRECISION-EXPENSIVE
EMBF = OPEN
NEXT CAMPAIGN = 13
The current new mechanism core is:
If this route works, the fixed power must come from genuinely new multiplicative parity-breaking information about the prime-generated error itself.